Stainless steel is an excellent kitchen material due to its stain- and heat-resisting capacity. It’s also fully customizable to any specifications and can be installed without seams. The surface is hygienically non-porous and easy to clean. On the down side, of course, is the fact that can and will show every greasy fingerprint and smear, as well as scratches.
Step 3: Mix up a small amount of Ardex Feather Finish. The manufacturer’s instructions recommend a 2:1 powder-to-water ratio. This is a good place to start, and you’ll be able to tell if that’s the ratio that works for you. It’s important to use the same ratio for each batch that you mix up for one layer, because even small differences in water content can (and will) slightly alter the color/darkness of the dried concrete. You’ll probably be mixing up several batches per layer.
Carefully stir up your mixture, being careful to keep the powder-dust down and not splash your powder everywhere. (This is the voice of experience speaking.) Ideally, you want a consistency not unlike peanut butter, where the concrete will stick to your putty knife (or trowel) when it’s held up vertical.
Isla Leroy Kitchen Countertops Wednesday December 13th, 2017 14:22:59 PM
Hit One of The Thumbnails Below to Get More Kitchen Countertops Ideas
Wednesday December 13th, 2017 14:22:59 PM